2017 Noble Quality Polyester Sparkling Powder Paint

• Customization: Available
• CAS No.: 9003-01-4, 9003-01-4
• Color: White
• Model NO.: NSM620
• Appearance: Liquid
• Main Raw Material: Epoxy
• Method: Spray
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO14001, CCC, ISO9001
• Substrate: Concrete Road
• Components: Pigment
• Formation Mechanism: Conversion Type
• Solid Content: 45.7%
• Humidity Requiement: Below 85%
• Type: Floor Paint
• Usage: Concrete Floor
• Einecs No.: 201-177-9
• Model Number: Nsm549
• Anti-Static Protection: Meets Esda
• State: Liquid Coating
• Mf: Compound
• Transport Package: Tin Package
• Specification: 1L, 2L, 4L, 5L, 18L, 20
• Trademark: nottaway
• Origin: China
• HS Code: 3208100000
• Production Capacity: 300 Ton / Month

Product Description

Specifications of paint

Abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors
By ACL Staticide is a one component abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors in electronics manufacturing, assembly and ESD protected areas. Surface resistivity measures 106 - 108 ohms per square average. It is an economical alternative to ESD tile that will save in material and labor costs. It is trouble free to install and maintain, and with its rich viscosity, it offers even distribution of conductive material and supreme coverage and a nice looking sheen. It is formulated with the finest high tech materals for consistent static protection.
Premium Decorative ESD Protection

    Water - based polyurethane
    Non-hazardous
    Non-flammable
    Static dissipative
    Conforms to ESDA, ANSI standard S20.20-2007
    Satin sheen
    Abrasion resistant - ASTM D4060 tabor tested
    Sovent resistant - MEK double rubs

Physical Properites of paint

    NSM549 floor paint tabor abrasion resistance tested to 2000 cycles (500 gram load) was .06 grams       with no break through
    Coverage 250 - 300 square feet (23 m2 - 28 m2) per gallon at 2 mils (50 microns)
    Dry time 2-24 hours for moderate foot traffic, 7 days for full cure
    Gloss value at 60 degree angle - 20+%
    Material - water based polyurethane
    Resistivity - 106 - 108 ohms per square average
    Solvent resistance - MEK double rubs
    Static decay - <.03 seconds per FTMS 101B, Method 4046
    Viscosity - 90-150 seconds at 77F (25C)
    VOC < 3 lbs/gallo

Graphic technology parameters of paint factory
 

Product name: General purpose epoxy floor paint Model : NSM549
Product features	1 Eco-friendly and smooth like mirror 2 Resistant to acid, salt, chemical solvent and oil corrosion, esp. to strong 3 Hardness, abrasion resistant, flexible.
Application	suitable for school, parking lot, microelectronic workshop practical GMP standard pharmaceutical industry esp.
Application Method	Roll and  brush
Technical Parameter	Mixing Ratio: paint : curing agent = 4 : 1 Coverage: 3-3.5sqm/kg
Construction process	1 Polish and clean the floor before painting 2 Prime the floor with VIT General Purpose Epoxy Primer WGM-9563 3 Apply middle layer with mixture of primer/paint & quartz mortar   4 Polish and clean the surface Paint one time or twice with General Purpose Epoxy Floor Top Paint WGM-9562

 

SOLVENTLESS EPOXY FLOOR PAINT
TYPE	A two-pack finish coating based on special solvent-less epoxy resin and hardener with chemicals resistance pigments.
USES	Anti-corrosive paint for chemical plants, power plants, steel factories.
CHARACTERISTICS	1. Tough and hard coat film with very good adhesion. 2. Brush one coat can obtain above 200 microns. 3. Excellent water and oil resistance 4. Excellent chemical resistance and anti corrosion. 5. Excellent mechanical wear resistance and electric insulation.
COLOR	Limited, please refer to color card
GLOSS	Above 85%
DENSITY	Above 1.35 Kg/L (mixture)
VISCOSITY	90 ~ 110 KU (25 ºC)
DRYING TIME	Set-to-touch 6 hrs. Dry hard 18 hrs. Full Dry 7 days (25 ºC).
OPTIMUM FILM THICKNESS	Wet 375 microns Dry 350 microns
MIXING RATIO	Base : Hardener = 15 : 4(by weight)
POT LIFE	30 minutes ( 25 ºC)
NON-VOLATILE CONTENT	Above 95% (mixture)
THINNER	Epoxy Thinner(cleaning tools only)
THINNER RATE	0
APPLICATION METHOD	Trowel and brush.
STORAGE SHELF LIFE	Minimum 1 year under normal storage conditions.
NOTE	1. Mix base and hardener according to mixing ratio and stir thoroughly then     use completely in five minutes. 2. Adhered moisture, grease, dirt, rusts and corrosive salts on substrate must     be cleaned thoroughly. 3. Avoid applying the paint in rainy weather or humidity above 85% RH,     particularly a wet surface must be thoroughly dried. 4. All equipments must be cleaned immediately after use. 5. When directly apply on the surface of cement products, the surface must be     completely dried. 6. When overcoating interval is exceeded, the paint film must be roughened to     insure adhesion.

Paint factory real photo



Paint factory introduction

Jinwei Chemical Co., Ltd. is an enterprise combined with Research & Development, manufacture, marketing and construction. Experienced in manufacturing and construction of concrete flooring coatings and projects, in the past 10 years, we finished hundreds of successful flooring projects, totally, more than 1 million square meters flooring area. We have 4 efficient production lines mainly for producing the epoxy resin flooring coating and ware-resistance dry-shake flooring material, with production amount of 30000 ton at least, annually. We are the member of ASCC(American Society of Concrete Contractors), and we've imported some advanced equipment and new technology to improve our capability on flooring projects and materials production.