| Customization: | Available |
|---|---|
| CAS No.: | 68609-97-2, 68609-97-2 |
| Kind: | Dispersant |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Items of analysis | Specification | Results |
| Appearance | CLEAR, COLOURLESS, OILY LIQUID | PASSED |
| Viscosity ( 25 °C, mPa·s) | 6-12 | 8.0 |
| Epoxy Value (Eq / 100g) | 0.32-0.35 | 0.34 |
| Epoxy equivalent (g/equivalent) | 285 - 309 | 294 |
| Organochlorine (Eq/ 100g) | ≤0.02 | 0.00626 |
| Inorganic Chlorine(Eq / 100g) | ≤0.005 | 0.00023 |
| Color (APHA) | ≤20 | 5 |
| Moisture (%) | ≤0.1 | 0.034 |
| Conclusion: | UP TO THE SPECIFICATION | |
Epoxy thinner is a specially formulated 100% volume solids (solvent less) two component epoxy. Typically used in a 3 layer coating system for superior corrosion protection of field welded joints of steel pipes or as an overcoat in multi-layer sleeve systems, this product provides the assurance that the pipe is fully protected and it will not be displaced and exposed to corrosive contaminants during the aligning & shrinking stages of the sleeve installation.
Application
Have solvent surround oxygen coating have intensity to be heavy, solid content high, anticorrosion of good performance, construction process simple having numerous advantages such as environmental pollution. Apply to urban pipeline antiseptic, bury pipeline antiseptic mending mouthing, elbowing, in charge of body person who bury antiseptic serious antiseptic field of overhauling etc. of the pipeline extensively at present.
Recommended use:
Solvent Free High Tensile Epoxy Coating (HEC) is a kind of combined coating of Group A and Group B, and should be mixed according to certain proportion (A:B=100:20-25) which is adjustable according to the real environmental temperature and complete the coating according to the prescribed time (About 30 minutes). In the process, brush coating, roller coating, doctor coating and bicomponent airless spray coater can be employed. The proper depth of the steel tube surface anchor stripe is desired to be 50-70μ m. The Products will change from a liquid to a solid when the environmental temperature lower than 15°C. So you need make it liquid first, as by heating. ( the temperature of Product A≤35°C, the temperature of Product B≤30°C).
Physical and Chemical Properties
Isophorone (IPHO) is an unsaturated cyclic ketone with highboiling point. It's an isomers mixture of a-isophorone (3,5,5-Trimethyl-2-Cyclohexen-1-One) and b-isophorone (3,5,5-Trimethyl-3-Cyclohexen-1-One). As a result of its particular chemical structure, Isophorone has an excellent dissolving power for various organics, polymers, resins and chemical products.
Usages
Isophorone is widly employed as a highboiling solvent in paints and varnishes, especially for PVDF resins and as levelling agent for polyacrylate, alkyde, epoxy and phenolic resins. Isophorone is the raw material for preparation of IPDA (isophorone diamine), IPDI (isophorone diisocyanate) and 3,5-Xylenol. In the herbicide and insecticide formulations, isophorone is also used and show its excellent emulsifying properties and high stability.
FAQ:
1. Q: What is our factory product range?
A:
For making mosaic main material paving mold,backing mesh,adhesive,printing ink,pigment,solvent,white back coat powder,paint,refractory slab, etc.
Other Accessories:hardener,thinner,gloss oil,frosting powder,Tio2,zirconium silicate,fine color,foil paper,flash chip,etc.
2. Q: How to order?
A:
1.Please send us your purchase order by Email or Fax,or you can ask us to send you Proforma Invoice for your order.
We need to know the following information for your order:
Product information:Quantity,Specification(temperature,Item Name,item No,size ,quantity, material, color,Shipping mark and packing requirement,
drawing or Sample will be the best.
2.Delivery time required.
3.Shipping information:Company name,Address,Phone number,Destination seaport.
4.Forwarder's contact details if there is any in China.
3. Q: How long and how to get sample from us ?
A:
1.If you need some sample to test,we can make as per your request,please provide us size or drawing to make
for You.
2.should pay for the transportation freight of samples,but the sample be free to offer.the free sample is mesh,
30g pigment,powder etc.
3.For new design mold Lead time for making sample:about 7 days,and should to pay the sample fee as
600RMB each design.
4.The transportation freight of samples: the freight depends on the weight and packing size and your area.
4. Q: What is the payment terms for sample cost and order amount?
A:
For sample we accept the payment sent by West Union,T/T, for orders, we can accept T/T.
5. Q: What is the whole process for doing business with us ?
A:
1.First,please provide details of the products you need we quote for you.
2.If price is acceptable ,we provide Proforma Invoice.If need the sample to do a test,we will send a sample PI to you for do the payment.
3.If client approve sample and require for bulk production for order,we will provide Proforma Invoice for client.and we will arrange to produce at once when we get 30% deposit.
4.We will send photos of all goods,packing,details after goods are finished.After be confirmed by clients,Pls transfer the balance 70% for the order.
We will arrange shipment and send all original docs to you.
6. Q: What advantages we have?
A:
1.Rich experience:We have more than 10 years experience in this industry.That means,we can preview the problems for the orders and products.
It will make sure to reduce the risk of bad situation to happen.
){kind=link}