• Jinwei Anti-UV Water Clear Polyurethane Casting Resin Plastic Coating

Jinwei Anti-UV Water Clear Polyurethane Casting Resin Plastic Coating

CAS No.: 9003-01-4, 9003-01-4
Color: White
Appearance: Liquid
Main Raw Material: Epoxy
Method: Spray
Level: Finish Coat
Customization:

Contact Supplier

Gold Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
NSM778
Drying Method
Air Drying
Certification
ISO14001, CCC, ISO9001
Substrate
Concrete Road
Components
Pigment
Formation Mechanism
Conversion Type
Solid Content
45.7%
Humidity Requiement
Below 85%
Type
Floor Paint
Usage
Concrete Floor
Einecs No.
201-177-9
Model Number
Nsm549
Anti-Static Protection
Meets Esda
State
Liquid Coating
Mf
Compound
Transport Package
Tin Package
Specification
1L, 2L, 4L, 5L, 18L, 20
Trademark
nottaway
Origin
China
HS Code
3208100000
Production Capacity
300 Ton / Month

Product Description


Jinwei Anti-UV Water Clear Polyurethane Casting Resin Plastic Coating

Specifications of plastic coating

Abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors
By ACL Staticide is a one component abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors in electronics manufacturing, assembly and ESD protected areas. Surface resistivity measures 106 - 108 ohms per square average. It is an economical alternative to ESD tile that will save in material and labor costs. It is trouble free to install and maintain, and with its rich viscosity, it offers even distribution of conductive material and supreme coverage and a nice looking sheen. It is formulated with the finest high tech materals for consistent static protection.
Premium Decorative ESD Protection

    Water - based polyurethane
    Non-hazardous
    Non-flammable
    Static dissipative
    Conforms to ESDA, ANSI standard S20.20-2007
    Satin sheen
    Abrasion resistant - ASTM D4060 tabor tested
    Sovent resistant - MEK double rubs

Physical Properites of plstic coating

    NSM778 plastic coating tabor abrasion resistance tested to 2000 cycles (500 gram load) was .06 grams       with no break through
    Coverage 250 - 300 square feet (23 m2 - 28 m2) per gallon at 2 mils (50 microns)
    Dry time 2-24 hours for moderate foot traffic, 7 days for full cure
    Gloss value at 60 degree angle - 20+%
    Material - water based polyurethane
    Resistivity - 106 - 108 ohms per square average
    Solvent resistance - MEK double rubs
    Static decay - <.03 seconds per FTMS 101B, Method 4046
    Viscosity - 90-150 seconds at 77F (25C)
    VOC < 3 lbs/gallo


Graphic technology parameters of paint coating factory
 

Product name: General purpose epoxy plastic coating paint

Model : NSM549

Product features

1 Eco-friendly and smooth like mirror

2 Resistant to acid, salt, chemical solvent and oil corrosion, esp. to strong

3 Hardness, abrasion resistant, flexible.

Application

suitable for school, parking lot, microelectronic workshop

practical GMP standard pharmaceutical industry esp.

Application Method

Roll and  brush

Technical Parameter

Mixing Ratio: paint : curing agent = 4 : 1

Coverage: 3-3.5sqm/kg

 

Construction process

Polish and clean the floor before painting

Prime the floor with VIT General Purpose Epoxy Primer WGM-9563

3 Apply middle layer with mixture of primer/paint & quartz mortar  

4 Polish and clean the surface

Paint one time or twice with General Purpose Epoxy Floor Top Paint WGM-9562

 

 

SOLVENTLESS EPOXY PLASTIC COATING

TYPE

A two-pack finish coating based on special solvent-less epoxy resin and hardener with chemicals resistance pigments.

USES

Anti-corrosive paint for chemical plants, power plants, steel factories.

CHARACTERISTICS

1. Tough and hard coat film with very good adhesion.

2. Brush one coat can obtain above 200 microns.

3. Excellent water and oil resistance

4. Excellent chemical resistance and anti corrosion.

5. Excellent mechanical wear resistance and electric insulation.

COLOR

Limited, please refer to color card

GLOSS

Above 85%

DENSITY

Above 1.35 Kg/L (mixture)

VISCOSITY

90 ~ 110 KU (25 ºC)

DRYING TIME

Set-to-touch 6 hrs. Dry hard 18 hrs. Full Dry 7 days (25 ºC).

OPTIMUM FILM THICKNESS

Wet 375 microns Dry 350 microns

MIXING RATIO

Base : Hardener = 15 : 4(by weight)

POT LIFE

30 minutes ( 25 ºC)

NON-VOLATILE CONTENT

Above 95% (mixture)

THINNER

Epoxy Thinner(cleaning tools only)

THINNER RATE

0

APPLICATION METHOD

Trowel and brush.

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

NOTE

1. Mix base and hardener according to mixing ratio and stir thoroughly then

    use completely in five minutes.

2. Adhered moisture, grease, dirt, rusts and corrosive salts on substrate must

    be cleaned thoroughly.

3. Avoid applying the paint in rainy weather or humidity above 85% RH,

    particularly a wet surface must be thoroughly dried.

4. All equipments must be cleaned immediately after use.

5. When directly apply on the surface of cement products, the surface must be

    completely dried.

6. When overcoating interval is exceeded, the paint film must be roughened to

    insure adhesion.


Jinwei Anti-UV Water Clear Polyurethane Casting Resin Plastic Coating

Paint factory real photo

Jinwei Anti-UV Water Clear Polyurethane Casting Resin Plastic Coating

Paint factory introduction

Jinwei Chemical Co., Ltd. is an enterprise combined with Research & Development, manufacture, marketing and construction. Experienced in manufacturing and construction of concrete flooring coatings and projects, in the past 10 years, we finished hundreds of successful flooring projects, totally, more than 1 million square meters flooring area. We have 4 efficient production lines mainly for producing the epoxy resin flooring coating and ware-resistance dry-shake flooring material, with production amount of 30000 ton at least, annually. We are the member of ASCC(American Society of Concrete Contractors), and we've imported some advanced equipment and new technology to improve our capability on flooring projects and materials production.

Send your message to this supplier

*From:
*To:
avatar Mr. Chris Luo
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory
Management System Certification
ISO 14001, IATF16949
OEM/ODM Availability
Yes