Jinwei Eco-Friendly Color Rich Spray Paint Powder Coating Nsm661
|FOB Price:||US $5 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $5/ Piece|
|Production Capacity:||300 Ton / Month|
|Transport Package:||Tin Package|
|Payment Terms:||L/C, T/T, Western Union, Money Gram|
- Model NO.: NSM661
- Appearance: Liquid
- Method: Spray
- Drying Method: Air Drying
- Substrate: Concrete Road
- Formation Mechanism: Conversion Type
- Humidity Requiement: Below 85%
- Usage: Concrete Floor
- Einecs No.: 201-177-9
- Anti-Static Protection: Meets Esda
- Mf: Compound
- Specification: 1L, 2L, 4L, 5L, 18L, 20
- HS Code: 3208100000
- Color: Red
- Main Raw Material: Epoxy
- Level: Finish Coat
- Certification: ISO14001, CCC, ISO9001
- Components: Pigment
- Solid Content: 45.7%
- Type: Floor Paint
- CAS No.: 9003-01-4
- Model Number: Nsm549
- State: Liquid Coating
- Trademark: nottaway
- Origin: China
Specifications of paint coating
Abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors
By ACL Staticide is a one component abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors in electronics manufacturing, assembly and ESD protected areas. Surface resistivity measures 106 - 108 ohms per square average. It is an economical alternative to ESD tile that will save in material and labor costs. It is trouble free to install and maintain, and with its rich viscosity, it offers even distribution of conductive material and supreme coverage and a nice looking sheen. It is formulated with the finest high tech materals for consistent static protection.
Premium Decorative ESD Protection
Water - based polyurethane
Conforms to ESDA, ANSI standard S20.20-2007
Abrasion resistant - ASTM D4060 tabor tested
Sovent resistant - MEK double rubs
Physical Properites of paint coating
NSM549 floor paint tabor abrasion resistance tested to 2000 cycles (500 gram load) was .06 grams with no break through
Coverage 250 - 300 square feet (23 m2 - 28 m2) per gallon at 2 mils (50 microns)
Dry time 2-24 hours for moderate foot traffic, 7 days for full cure
Gloss value at 60 degree angle - 20+%
Material - water based polyurethane
Resistivity - 106 - 108 ohms per square average
Solvent resistance - MEK double rubs
Static decay - <.03 seconds per FTMS 101B, Method 4046
Viscosity - 90-150 seconds at 77F (25C)
VOC < 3 lbs/gallo
Graphic technology parameters of paint coating factory
Product name: General purpose epoxy paint coating
Model : NSM549
1 Eco-friendly and smooth like mirror
2 Resistant to acid, salt, chemical solvent and oil corrosion, esp. to strong
3 Hardness, abrasion resistant, flexible.
suitable for school, parking lot, microelectronic workshop
practical GMP standard pharmaceutical industry esp.
|Roll and brush|
Mixing Ratio: paint : curing agent = 4 : 1
1 Polish and clean the floor before painting
2 Prime the floor with VIT General Purpose Epoxy Primer WGM-9563
3 Apply middle layer with mixture of primer/paint & quartz mortar
4 Polish and clean the surface
Paint one time or twice with General Purpose Epoxy Floor Top Paint WGM-9562
SOLVENTLESS EPOXY FLOOR PAINT COATING
A two-pack finish coating based on special solvent-less epoxy resin and hardener with chemicals resistance pigments.
Anti-corrosive paint for chemical plants, power plants, steel factories.
1. Tough and hard coat film with very good adhesion.
2. Brush one coat can obtain above 200 microns.
3. Excellent water and oil resistance
4. Excellent chemical resistance and anti corrosion.
5. Excellent mechanical wear resistance and electric insulation.
Limited, please refer to color card
Above 1.35 Kg/L (mixture)
90 ~ 110 KU (25 ºC)
Set-to-touch 6 hrs. Dry hard 18 hrs. Full Dry 7 days (25 ºC).
OPTIMUM FILM THICKNESS
Wet 375 microns Dry 350 microns
Base : Hardener = 15 : 4(by weight)
30 minutes ( 25 ºC)
Above 95% (mixture)
Epoxy Thinner(cleaning tools only)
Trowel and brush.
STORAGE SHELF LIFE
Minimum 1 year under normal storage conditions.
1. Mix base and hardener according to mixing ratio and stir thoroughly then
use completely in five minutes.
2. Adhered moisture, grease, dirt, rusts and corrosive salts on substrate must
be cleaned thoroughly.
3. Avoid applying the paint in rainy weather or humidity above 85% RH,
particularly a wet surface must be thoroughly dried.
4. All equipments must be cleaned immediately after use.
5. When directly apply on the surface of cement products, the surface must be
6. When overcoating interval is exceeded, the paint film must be roughened to
Paint factory real photo
Paint factory introduction
Jinwei Chemical Co., Ltd. is an enterprise combined with Research & Development, manufacture, marketing and construction. Experienced in manufacturing and construction of concrete flooring coatings and projects, in the past 10 years, we finished hundreds of successful flooring projects, totally, more than 1 million square meters flooring area. We have 4 efficient production lines mainly for producing the epoxy resin flooring coating and ware-resistance dry-shake flooring material, with production amount of 30000 ton at least, annually. We are the member of ASCC(American Society of Concrete Contractors), and we've imported some advanced equipment and new technology to improve our capability on flooring projects and materials production.